|
||||
|
Niagara County Community College
|
||||
|
|
||||
|
RISK ASSESSMENT FOR PROFESSIONAL ENGINEERS
(KODAK ENGINEERS ONLY)
Kodak course code: 1012 This course is recommended for safety and health professionals, engineers, equipment designers, construction firm managers, and supervisors who oversee tasks in the industrial workplace. Identifying hazards and reducing risk are fundamental to reducing and eliminating injuries in the workplace. This course will enable participants to identify hazards and risks in the workplace, determine when risk is acceptable, and effectively communicate risks to management. Safety by design, risk for maintenance and skilled trade personnel, applicable regulations and national concensus standards, and product liability and the legal implications will be covered. A highlight of the day will be a panel discussion with representatives from industry, academia, government, and the legal community. Panelists include: Art Dube, area OSHA Director; Scott DeLuca, Underberg & Kessler, LLP; representative from academia TBD; and the instructors, Dennis Cloutier and Bruce Main. This course qualifies for BCSP COC credits and ABIH CM credits.
> HEALTH & SAFETY COURSE LIST
> SCHEDULE
> KODAK EMPLOYEE REGISTRATION > NON-KODAK EMPLOYEE REGISTRATION
10-HOUR CONSTRUCTION OUTREACH TRAINING
(OPEN TO THE PUBLIC)
Kodak course code: 7960 The 10-hour program is intended to provide a variety of instruction on general industry safety and health standards to entry level workers. Topics Covered Include: Introduction to OSHA OSH Act/ General Duty Clause Subpart C - General Safety & Health provisions, Competent person Recordkeeping Subpart K (Electrical) Subpart M (Fall Protection) Subpart I (Personal Protective Equipment) Subpart L (Scaffolding) Subpart P (Excavations) Subpart H (Material Handling, Storage, Use, & Disposal) Class size is limited to 25 students maximum. Class is conducted in building 28, room SB-1. For more information please call NCCC Department of Corporate Training at (716) 433-1856, Barb Michel, ext. 15.
> HEALTH & SAFETY COURSE LIST
> SCHEDULE
> KODAK EMPLOYEE REGISTRATION > NON-KODAK EMPLOYEE REGISTRATION
30-HOUR CONSTRUCTION STANDARDS
(OPEN TO PUBLIC)
Kodak course code: 3924 This program is intended to provide a variety of information on construction industry safety and health standards to construction workers. Topics Covered Include:
Class size is limited to 25 students maximum. Class is conducted in building 28, room SB-1. For more information, or to register, please contact Niagara County Community College Department of Corporate Training at (716) 433-1856, ext 15. Barb Michel.
> HEALTH & SAFETY COURSE LIST
> SCHEDULE
> KODAK EMPLOYEE REGISTRATION > NON-KODAK EMPLOYEE REGISTRATION
INTERNAL COMBUSTION ROUGH TERRAIN TRUCK SAFETY - 4 HOURS
(KODAK EMPLOYEES ONLY)
Kodak course code: 1423 This class is designed to provide the operator with the proper safety procedures and safe operation of an internal combustion terrain truck. Course modules include:
Training conducted on site. For more information or to register, please contact Niagara County Community College Department of Corporate Training at (716) 433-1856.
> HEALTH & SAFETY COURSE LIST
> SCHEDULE
> KODAK EMPLOYEE REGISTRATION > NON-KODAK EMPLOYEE REGISTRATION
LONG TOW / DOUBLE PALLET JACK - 2 HOURS
(KODAK EMPLOYEES ONLY)
a/k/a: "Double Runner" Kodak course code: 5218 This class is designed to provide the operator with the proper safety procedures and safe operation of a long tow. Course modules include:
Class size is limited to 8 students. Training conducted at 1547 Lyell Avenue or on site. For more information or to register, please contact Niagara County Community College Department of Corporate Training at (716) 433-1856, Barb Michel, ext.15.
> HEALTH & SAFETY COURSE LIST
> SCHEDULE
> KODAK EMPLOYEE REGISTRATION > NON-KODAK EMPLOYEE REGISTRATION
MANLIFT SAFETY - 4 HOURS
(KODAK EMPLOYEES ONLY)
a/k/a: covers all personnel lifts including "Scissorlift", "Boomlift", "JLG" Kodak course code: 2454 This class is designed to provide the operator with the proper safety procedures and safe operation of a manlift. Course modules include:
Training conducted on site. For more information or to register, please contact Niagara County Community College Department of Corporate Training at (716) 433-1856, Barb Michel, ext.15.
> HEALTH & SAFETY COURSE LIST
> SCHEDULE
> KODAK EMPLOYEE REGISTRATION > NON-KODAK EMPLOYEE REGISTRATION
10-HOUR GENERAL INDUSTRY OUTREACH TRAINING
(OPEN TO THE PUBLIC)
The 10-hour program is intended to provide a variety of instruction on general industry safety and health standards to entry level workers. Topics Covered Include:
Class size is limited to 25 students. For more information or to register, please contact Niagara County Community College Department of Corporate Training at (716) 433-1856, Barb Michel, ext.15.
> HEALTH & SAFETY COURSE LIST
> SCHEDULE
> KODAK EMPLOYEE REGISTRATION > NON-KODAK EMPLOYEE REGISTRATION
30-HOUR GENERAL INDUSTRY STANDARDS
(OPEN TO THE PUBLIC)
Kodak course code: 7962 This program is intended to provide a variety of information on general industry safety and health standards. Topics Covered Include:
Class will be conducted in building 28, room SB - 1 Class size is limited to 25 students maximum. For more information, or to register, please contact Niagara County Community College Department of Corporate Training at (716) 433-1856, ext 15. Barb Michel.
> HEALTH & SAFETY COURSE LIST
> SCHEDULE
> KODAK EMPLOYEE REGISTRATION > NON-KODAK EMPLOYEE REGISTRATION
LOCKOUT / TAGOUT AUTHORIZED / AFFECTED - 2 HOURS
(OPEN TO THE PUBLIC)
Kodak course code: 5140 Course is designed for personnel such as operators, engineers, etc. Standard course to cover company posted procedures and OSHA Standard 29 CFR 1910.147. Two hour minimum course with no refresher required. Class will be conducted in building M28, room SB-1 Class size : 20 students maximum For more information or to register, please contact Niagara County Community College Department of Corporate Training at (716) 433-1856, Barb Michel, ext.15.
> HEALTH & SAFETY COURSE LIST
> SCHEDULE
> KODAK EMPLOYEE REGISTRATION > NON-KODAK EMPLOYEE REGISTRATION
MANABOARD - 4 HOURS
(KODAK EMPLOYEES ONLY)
a/k/a: "Cherry Picker", "Order Picker" Kodak course code: 4659 This class is designed to provide the operator with the proper safety procedures and safe operation of a manaboard. Course modules include:
Class size is limited to 8 students. Training conducted on site. For more information or to register, please contact Niagara County Community College Department of Corporate Training at (716) 433-1856, Barb Michel, ext.15.
> HEALTH & SAFETY COURSE LIST
> SCHEDULE
> KODAK EMPLOYEE REGISTRATION > NON-KODAK EMPLOYEE REGISTRATION
OVERHEAD CRANE OPERATOR - 6 HOURS
(KODAK EMPLOYEES ONLY)
Kodak course code: 6859 The course is designed to teach the student in safe overhead crane operations. Course modules include:
Training conducted on site. For more information or to register, please contact Niagara County Community College Department of Corporate Training at (716) 433-1856, Barb Michel, ext.15.
> HEALTH & SAFETY COURSE LIST
> SCHEDULE
> KODAK EMPLOYEE REGISTRATION > NON-KODAK EMPLOYEE REGISTRATION |
||||
|
NCCC Corporate Training Center / Kodak Training Facility
Building 28, Kodak, 200 Ridge Road West
Richard Gorko, Director Phone: (716) 433-1856 E-mail: corp@niagaracc.suny.edu Copyright ©2006 Niagara County Community College |
||||
